LOMVUM Laser Level 3D 12line 360 Rotary Green Laser Leveling Red Horizontal Vertical Cross Line Outdoor Laser Level With Base

LOMVUM Laser Level 3D 12line 360 Rotary Green Laser Leveling Red Horizontal Vertical Cross Line Outdoor Laser Level With Base
  • Продавецxqnews.us
  • Список ценUS $108.00piece
  • Продажная ценаUS $108.00piece
  • ДоставкаБесплатная доставка
  • Рейтинги4,6 (519)

Oписание продукта

 

Our laser level for a number of plant development, and production of single-chip line plate ; developed and produced for electronic leveling line laser level meter precision single-axis sensors and associated control circuitry ; development and production of domestic green level meter circuit for manufacturers choose ; through self-developed core technology components , commissioning and production of high-end condominium with electronic leveling line laser .
Because our products are manufactured by its core components made with flexible technology upgrades and expansion capabilities , which makes our electronic leveling line laser at this stage , a similar product , the most powerful product .
Are the use , investment orthogonal lines ; diagonally with cast any slashes ; backwards with cast floor line. A similar product in the highlights.
Change the way leveling , because stable and quality improved ; because stable and can work the same as the radius of the total station ; Because it is leveling motor , bearing the flexibility of not affect the accuracy of , the country is using the electronic level sensor , high precision and more ; conductive thin copper wire of 0.05 mm without the ; overall equipment life certainly extended.
 
 
Electronic leveling line laser has much advantage in practical applications ?
LETER to find out their differences , do a number of field tests , the test results are as follows :
 
Test prototype : a domestic brand of a gravity - magnetic damping laser level and a CADA wins electronic leveling laser level .
Test site : 16-story high-rise buildings.
 
The first test point : building the ground floor, the two instruments are mounted on a level tripod , observed from the horizontal laser line five meters of the instrument , as stable as two lines ; observed 12 meters horizontal laser line , discovered gravity pendulum there are slight teeter phenomenon, and electronic stability leveling does not move ;
The second test point : building three, the two instruments are mounted on a level tripod , laser line level instruments to observe from five meters , we found a significant gravitational pendulum teeter phenomenon, and electronic stability leveling observed 12 meters , found the gravity pendulum 3mm shaking up and down , while the electronic leveling stability ;
Third test point : seven buildings , the two instruments are mounted on a level tripod observed level of the laser line from the instrument at 5 meters , gravity pendulum found 3mm shaking up and down , while the electronic leveling stable observed for 12 meters , found the gravity pendulum 7mm shaking up and down , while the electronic leveling stability ;
The fourth test point : building 16 floors , the two instruments are mounted on a level tripod , laser line level instruments to observe from five meters and found that gravity pendulum 4mm shaking up and down , and the stability of the electronic leveling observed 12 meters , found the gravity pendulum 10mm shaking up and down , while the electronic leveling stability ;
The fifth test point : four buildings , the two instruments are mounted on a level tripod , use a tripod between the two hammer punch holes in the floor , away from the horizontal laser line instrument to observe five meters and found gravity put under the sway amplitude reaches tens of millimeters , while the upper and lower electronic leveling jitter 1 mm , 12 meters was observed and found that the magnitude of the gravity pendulum teeter reach tens of millimeters , while the electronic leveling up and down chattering ;
 
Through several tests, also found a rule, in large wind outside , shaking more seriously ; wind hours in the outside world , shaking smaller.
 
Test Conclusion :
Gravity - magnetic damping : typically used low-rise buildings , work within a radius of 7 meters , lines stable ; vibration phenomenon can not be used to have an environment .
Electronic Leveling : there shaking phenomenon can be used for high-rise buildings and has a vibration phenomenon environment, working radius can be large .
 
In short , electronic leveling line laser , the radius of hours at work , can be used as decoration aids, tops in the instrument point laser modules, work on the expansion of the use of the radius , it is a no- telescope laser level ; rotation this instrument , the laser spot is flat trajectory , is a swinger . This is the electronic leveling line laser causes the mapping industry selling products
 
 
 
Electronic leveling line laser manual
I. Instrument Description
The Company is a full- line laser electronic Anping style than usual gravity - magnetic damping type, with good stability, high precision, long life characteristics. This model , which has become the mainstream of the world\\\'s developed application mode . In our country can produce this pattern cast line instrument manufacturers, heavier force - magnetic damping type much less . Currently , this model is cast line instrument has become the industry \\\'s main export products. In recent years, with the improvement of the level of applications , the demand for this model line projectors are gradually increasing, substituted gravity - magnetic damping trend.
The instrument is designed for computer-controlled products, its basic principles are: 1 , the laser line or vote cast point modules mounted on dual-axis rotation of the pendulum ; 2 on the pendulum by two axial installation of two high-precision level sensor ; 3 , in this pendulum bracket by two axially fitted with two micro- adjustment motor ; 4 , inside the instrument is equipped with computer-controlled biaxial fine-tune the system . Sensors, computer controlled systems and micro- motors adjust the motor three closed-loop controlled biaxial constitute adjusting mechanism , making the instrument to achieve high precision and high stability leveling purposes.
The instrument line wavelength laser module is 635nm, the wavelength of the laser module point is 650nm, the laser line is clear and bright ; dual spinner configuration , continuous fine-tuning in the range of 360 degrees ; instrument beyond leveling range , the laser lines automatically shut down, and sound an alarm ; thanks to electronic Anping style , shaking phenomenon in the case of high-level and long-distance case , the laser hatching particularly stable , this aspect of any gravity - magnetic damping instrument is unmatched ; this instrument has also increased the running any line function and cast down the line features that make this powerful instrument . Become the first choice for high-end users .
Second, the appearance of the instrument
The instrument is a two- part plastic body and aluminum body
Aluminum body has an aluminum plate of aluminum plate, adjustable feet , fine-tuning knob and integral bracket holes
Upper and lower aluminum plate is rotated by turning the plastic body and the adjustment knob can be rotated 360 degrees
Adjustable feet can be adjusted by adjusting the foot , making the instrument work within the scope of Anping
Plastic body has a plurality of laser line emission window ( Line 5 5 , 8 line has eight ) , the composition of the battery compartment and the control panel
Laser emission window : exit of the laser line
Battery compartment : for the press release on 4 AA batteries
Control Panel: The instrument used to open and switch on and off various functions
Third, using the method of operation of the instrument
The instrument has two laser line emission mode , one for the continuous emission mode , another way for the pulse emission ; continuous emission mode is a short-range use ( just press the ON button to boot into this mode ) ; pulse transmission mode is in line with using pulsed laser detector distance mode ( hold down the middle of the pULSE key, then press the ON button to start entering this way ) , this approach into the brightness of the laser tube , way over the continuous emission of laser light to darker ; in both ways , the other methods of operation are all the same functions , each continuous manner explained below .
( A ) , upright way
1 , the instrument can be mounted on a stable platform , adjust the height of the foot by adjusting the instrument placement angle is within the range of Anping ; or fixed on a dedicated stand , stand by adjusting the length of the foot , so that the instrument is within the scope of Anping ; two ways.
2 , press the ON button on the control panel ( into pulse mode , to hold down the middle of the PULSE key, then press the ON button ) , the instrument \\\'s red indicator light, indicating that the instrument is turned on.
3 , after the power is turned on , the green light is flashing, the instrument is leveled , until the green light stops flashing , indicating that the instrument has been leveled . When placed flat or horizontal mounting bracket degree change, the instrument will automatically leveling , when the green indicator flashes until leveling , stop blinking.
4 , the instrument on, press the H key control panel , you can achieve two horizontal light, bright and four horizontal cycle four horizontal lines Quanmie ( 5 lines only horizontal lines open and closed ) ; press the control panel V key , you can achieve two vertical lines bright , bright four vertical lines and cycle four vertical lines Quanmie ; press the LOCK button control panel in the middle of the yellow light is on, the instrument automatically leveling mechanism stopped working in this way Next , the instrument can be arbitrarily placed or installed at any angle adjustment with random shelves , so that the instrument can be put in any arbitrary degree of myopia slash and horizontal ( visual ) , and then press the LOCK button , yellow indicator light turns off , the instrument back to the automatic leveling working condition.
5 , press the OFF button on the control panel to turn off the machine, after the instrument is turned off , the battery should be removed to prevent long-term need , battery leakage damage the instrument.
( Two ) , inverted way
1 , the instrument can be fixed in a particular instrument bracket ( optional Company ) , mounted on a bracket upside down , adjust the level of the bracket ( universal observation bubble level on the bracket ) , so that the instrument is in Anping range.
2 , press the ON button on the control panel ( into pulse mode , to hold down the middle of the PULSE key, then press the ON button ) , this instrument red lights. At this level of the laser lines automatically shut down.
3 , after the power is turned on , the green light flashes to indicate the instrument is leveled , until the green light stops flashing , indicating that the instrument has been leveled . When the level of the mounting bracket changes , the instrument will automatically leveling , then the indicator flashes green until after leveling , stops flashing.
4 , the instrument on, press the H key control panel , because the horizontal shield state , press this key is invalid ; press the V key to the control panel , you can achieve two vertical lines bright , bright four vertical and four vertical lines cycle line Quanmie ; press the control panel in the middle of the LOCK button , yellow indicator light, the automatic leveling mechanism stops working, and then press the LOCK button , yellow light off , automatic leveling instrument restored to working condition .
5 , press the OFF button on the control panel to turn off the machine, the instrument off, remove the batteries should be installed to prevent long-term need , battery leakage damage the instrument.
(C ) in any way
1 , the instrument can be mounted on a stable platform , by adjusting the height adjustable feet , making the instrument placement angle is within the range of Anping , or fixed on specializing in the bracket, the bracket by adjusting the length of the foot , so that the instrument is in the range of Anping within two ways .
2 , press the ON button on the control panel ( into pulse mode , to hold down the middle of the PULSE key, then press the ON button ) , the instrument \\\'s high red light , indicating that the instrument is turned on.
3 , after the power is turned on , the green light flashes to indicate the instrument is leveled , until the green light stops flashing , indicating that the instrument has been leveled . When placed flat or horizontal mounting bracket degree change, the instrument will automatically leveling , when the green indicator flashes until leveling , stop blinking.
4 Press LOCK button , yellow indicator light. Then cast line instrument into any way to make automatic leveling mechanism stops working, in this way , the instrument can be arbitrarily placed or installed at any angle adjustment with random shelves , the instrument may be placed at any height and any slashes myopia horizontal ( visual ) , and then press the LOCK button , yellow indicator light turns off , the instrument back to the automatic leveling working condition.
5 , press the OFF button on the control panel to turn off the machine, the instrument off, remove the batteries should be installed to prevent long idle , battery leakage and damage to the equipment.
Fourth, the technical indicators
635nm wavelength laser tube line
Point 650nm wavelength laser tube
Indoor 10m working radius
Chose the little line pipe, not less than 30 m working radius
Pulsed mode , with the detector ( optional ) working radius of not less than 50 meters for outdoor leveling
Anping range + -4 degrees
Horizontal divergence angle of not less than 130 degrees
Vertical divergence angle of not less than 130 degrees
Horizontal Accuracy + -1mm/10m
Vertical accuracy + - 1mm/10m
Zenith Accuracy + -1mm/3m
Under point accuracy + -1mm/1.5m
Instrument supply voltage 4.4 ~ 6.0V
Fifth, the maintenance of the instrument
1, the apparatus in use, if the red light flashes , indicating that the supply voltage has been below 4.4V, then replace the battery , or affect the regulation of the instrument accuracy ;
2, if the equipment is not working, please contact us for timely maintenance
 
 
 
Packing length 28 cm high 29 W : 20 CM Weight : 2.5KG